Home › Forums › General Questions › Too much lows on this?
- This topic has 4 replies, 3 voices, and was last updated 11 years, 1 month ago by woodsdenis.
-
AuthorPosts
-
gdomeierParticipant
Looking for feedback on this mix. Specifically, are the lows and or low/mids too muddy?
woodsdenisParticipantSounds ok to me, It certainly isn’t bass light mind you sound cloud can do funny things.
If you feel there is a boom, hi pass channels. I actually do this on most channels to take out sub frequencies that maybe don’t interfere individually, but when there is a lot going on it adds up. I also cut 20-40 hz on the master buss, its inaudible unless your in an IMAX theatre with a THX rig.
56 StratParticipantActually gdomeier, it’s refreshing to hear something with ” body “. You have a nice full warm sound happening there with good clarity, all of which is missing in too much of today’s music and recording styles. a bit too hot of a level for my personal taste [ but that’s all it is, my personal taste ]. Too much lows ? no, not at all ! it’s a big warm and full sound with actual tone, like days gone by 🙂 Stay the course your on gdomeier , love it, good job …… and a very cool tune !
gdomeierParticipantThank you both for the feedback. It was helpful. I generally high pass guitars and bass around either 40 or 30 hz. Same on the master with a high cut too.
I generally track using seinheisser hd280 phones. The bass is very light on them, so when it sounds thick there, I know it’s waaaay to much. I generally listen to my track in the phones, then my pc speakers and finally some consumer behind the head sony consumer phones at work.
On a related note, I understand mixing on headphones is generally considered verboten, but other than issues with panning, is there a reason not to do it?
Seems it would be easier to get a flat/reference type of sound via headphones rather than expensive studio monitors and room treatments.
woodsdenisParticipantOn a related note, I understand mixing on headphones is generally considered verboten, but other than issues with panning, is there a reason not to do it?
No reason not to do it. I couldn’t personally.I know a lot of mix engineers that will reference mixs on headphones but never do a whole mix on them. Whatever works.
-
AuthorPosts